12VDC, 30 RPM Gearhead Motor


12VDC, 30 RPM Gearhead Motor
Images/32204-large.jpg Images/360-3D.jpg   California Proposition 65 Warning
Stock Number: 32204 MD
 Review Average:  
 Number of Reviews: 4
 View Reviews | Review this item
$12.95


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available


SHARE
    
     Email this to a friend     

Detailed Description

MFG: ZHENGKE
P/N: ZGA37RG
COIL: 12V/1.1A
Gear motor rated: 30 RPM, 14Kg/cm Torque: 6mm dia. X 14mm flatted steel shaft, bronze bearings. Six M3x0.5 threaded mounting holes in front. Solder terminals
L: 2-3/4" (Body) Dia: 1-1/2" WT: .5

View PDF Data Sheet

California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here? As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.

As an example:
   ABS plastic contains styrene
   PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
   electrolytic capacitors can contain Ethylene glycol
   Brass can contain Lead
   flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
   Aluminum alloys can contain Chromium

To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!


 Product ReviewsClick here to review this item
Verified Purchase
Very pleased.
ebay
 
Good torque, good value.
This is a good motor and gear reduction, its not great. It has good torque but is somewhat noisy. My application is very low duty cycle, perhaps 30 seconds a day. The output shaft is a low quality bronze bushing and has some slop. One of the six M3 screw mounting points was bad, other 5 were fine. I expect long life with my low usage. Overall a good value and would purchase again. If you need higher precision spend more.
 
Great Motor
Works very well, Lots of torque.
David
 
Doesnt last very long
I bought 2 or more of these motors and the first time using it it stopped running less than 600 hours of op. Put in second motor and measured current draw, less than 450 mA so motor not overloaded if the 1.1 amp spec is real. Beware these may be factory seconds!
 

You May Also Like